This low cost clamp on ultrasonic flowmeter is ideal for long-term deployment for flow measurement and closed-pipe applications, such as liquid process control, water flow measurement (hot/chill water, city water, sea water), sewage and sludge measurement, and measurements of oil (crude/diesel/fuel), chemicals (alcohol, acids, etc.), beverage, and many other liquids. Once the sensors are clamped on the pipe using the supplied stainless steel straps it can be programmed in a matter of minutes via the front keypad. In addion to the 4-20mA and pulse outputs the unit can also communicate via GSM modem.
OMNI-TUF-200F Wall Mount Ultrasonic Flowmeter supplied with transducers for pipe sizes 15-100mm or 100 - 700mm, complete with manual and stainless steel straps.
Features:
High accuracy. Normally, ±1%. When on-site calibration available, ±0.5%.
Wide flow range 0.03 to 105ft/s.
Wide pipe size range (from 1" to 240").
Noninvasive. No pipe disturbance. No moving parts, no pressure drop.
Easy and economical installation. No cutting pipe, non drilling hole.
Suitable for all commonly used pipe materials
Easy to use and set up. Self-explanatory menu programming
Velocity, volumetric and totalized flow
GPRS / GSM networking capability with certain model
Ideal for both clean and opaque liquid flow measurements
Display instantaneous flow rate, accumulated flow rate (positive, negative and net rates), velocity, time, analog inputs, etc.
Units
English (U.S.) or metric
Signal Outputs
Current output: 4-20mA or 0-20mA. Impedance 0-1k. Accuracy 0.1%
OCT output: pulse signal for accumulated flow rate (positive, negative and net rates); frequency signal for instantaneous flow rate (0-9,999Hz selectable)
Relay: able to output 20 signals, such as no signal, reverse flow, etc.
Sound alarm
Signal Inputs
5 channel analog signal inputs (for signals such as temperature, pressure, liquid level, etc.)
Recording
Automatically record the following information:
1) The totalizer data of the last 64 days / 64 months / 64 years;
2) The power time and corresponding flow rate of the last 64 times power on and off events;
3) Allow manual or automatic flow loss compensation;
4) The instrument working status of the last 64 days.
Communication Interface
RS-232.
Enclosure
Protection Class: IP65 (NEMA 4X)
Explosive Proof Class: ExdIIBT4 (for model STUF-200F2V only)
Liquids
Liquid Types
Virtually all commonly used liquids (full pipe)
Liquid Temp
32˚F - 212˚F (0˚C - 100˚C)
Suspension concentration
< 10,000ppm and small air bubble concentration
Pipe
Pipe Size
1" - 240"
Pipe Material
All metals, most plastics, fiber glass, etc. Allow pipe liner.
Pipe Straight Section Length
Better longer than 15D, where D is pipe diameter. If a pump is near, the straight pipe section following the pumps should be > 30D.
Cable
Shielded transducer cable. Standard length 15ft (5m). Can be extended to 1640ft (500m). Contact the manufacturer for longer cable requirement.
Cable should not be laid in parallel with high-voltage power lines, neither should it be close to strong interference source such as power transformers.
Environment
Temperature
Main unit: 0˚F - 176˚F (-30˚C - 80˚C)
Transducer: -40˚F - 212˚F (-40˚C - 100˚C)
Humidity
Main unit: 85% RH
Transducer: water-immersible, water depth less than 10’ (3m)
For further information,
technical advice, or a
quotation please call or
email
us. If you are not sure which
product you need one of our
technical sales advisors will be
happy to discuss your
application. We also accept
company purchase orders by fax
or post. Credit card orders can
also be placed over the phone
for any product.
ref
description
downloads
price($)
Order Item
OMNI-TUF-200F-2-5-ADAR
OMNI-TUF-200F Wall Mount Ultrasonic Flowmeter supplied with Medium transducers for pipe sizes 100 - 700mm, complete with 5 metres of cable, manual and stainless steel straps.
OMNI-TUF-200F Wall Mount Ultrasonic Flowmeter supplied with transducers for pipe sizes 25 - 100mm, complete with 5 Metre cable set, manual and stainless steel straps.
